Tank Alert® alarms provide audio/visual warning of potential threatening liquid level conditions.
The Tank Alert® XT indoor/outdoor alarm system provides audio/visual warning of potential threatening liquid level conditions in lift pump chambers, sump pump basins, holding tanks, sewage, agricultural and other non-potable water applications.
If an alarm condition occurs, the horn sounds and red alarm beacon activates. The horn can be turned off, but the alarm beacon remains on until the condition is remedied. Once the condition is cleared the alarm will automatically reset.
UL Listed, CSA Certified
Five-Year Limited Warranty
120 VAC, 50/60 Hz
6.5 x 4.5 x 3.0 inches (16.51 x 11.43 x 7.62 cm), indoor/outdoor weatherproof thermoplastic which meets Type 3R water-tight standard
85 decibles at 10 feet (3 meters) meets Type 3R water-tight standard as installed by factory
UL Listed, Type 4X beacon assembly
Certified to IP66 and IP68 standards
AUXILIARY ALARM CONTACTS (Optional):
120 VAC. 5 amps max., 50/60 Hz
PRE-MOUNTED TERMINAL BLOCK (Optional):
20 amps, 120/230 VAC
POWER CORD (Optional):
6 foot (1.8 meter) cord with 120 VAC plug
SJE SignalMaster® control switch with mounting clamp
Cable: 15 feet (4.57 meters), flexible 18 gauge, 2 conductor (UL) SJOW, water-resistant (CPE)
Float: 2.74 inches diameter x 4.83 inches long (7.0 cm x 12.3 cm), high impact, corrosion resistant polypropylene housing for use in sewage and water up to 140oF (60oC)